TURBO BLOWER / COMPRESSOR
ENERGY SAVING
A certification of high-efficiency energy using an appliance from the Korea Energy Management Corporation was obtained by applying High-efficiency compressor and motor, and achieving an overall efficiency of 65% or higher for the all models. It shows an average energy-saving effect of 40% or higher compared to the displacement root’s blower. Variable capacity through the change of inverter frequency allows an additional energy-saving effect of 10% or higher.
VARIABLE CAPACITY
An inverter can have defects caused by the degradation and oxidation of exposed wires rather than by internal elements.
Therefore, the compression unit and the electric unit (including the inverter) can be separated and installed in conditions with a high ambient temperature or toxic and corrosive gases. It uses a non-contact air bearing.
LOW NOISE
By installing an inlet silencer (ACE Turbo’s patent) in the inlet flow channel, the noise of all models becomes 80 dBA or lower, applying a unique acoustic isolation structure in the cabinet (based on KS B 6350).It uses a non-contact air bearing. Air Bearing Technology
LOW VIBRATION
A centrifugal blower that sucks in and discharges air sequentially, and it has approximately zero vibration.
It does not require vibration-proof and fixation construction for products.
However, vibration-proof and fixation construction are recommended if there are frequent earthquakes or there is an intense shaking in the surrounding environment. 10% or higher.
EASY OPERATION
Turbo Blower produces the desired pressure and air volume by setting the rotating speed of high-speed motor and Impeller at the desired speed through the variable frequency of the inverter. Basically, Variable capacity is available. Variable operation modes–including constant operation, proportional operation, constant-pressure operation, DO operation, etc.,–according to customers’ needs are available. User convenience is also increased by developing an ACE operation mode that integrates proportional operation, constant-pressure operation, and quantitative operation into one. It uses a non-contact air bearing. Centrifugal Air Compressor Korea

LOW MAINTENANCE CAST
It is not necessary to use lubricants regularly or replace bearings. It is easy to maintain as it only requires periodic cleaning or replacement of the inlet filter. It uses a non-contact air bearing.